Prologue

To control the fan on the extra transmission cooler I installed on my 1999 Rialta I first tried using a thermostat which is inexpensive and connects to the transmission cooler line. The problem I encountered was that the scan gauge temperature which shows the actual temperature of the transmission fluid in the transmission did not match the temperature in the transmission hose going to the cooler. The standard thermostat is supposed to turn on at 185 degrees (F) but the scan gauge showed a temperature getting close to 195 and the thermostat still had not turned on.
The purpose of this project was to automatically turn on and off the external fan driven transmission cooler to maintain the transmission temperature in a user selectable range and to get the transmission temperature directly from the ECM.
On a recent long trip this setup kept the transmission temperature within the selected range 99% of the time. There were situations where I forgot to manually downshift from 4th to third on long climbs and the fan driven external cooler along with the external cooler in front of the radiator could not keep the transmission fluid temperature in range and only by manually downshifting could the coolers cool the transmission sufficiently.
If I get some free time the next iteration of this project would be to get rid of the scangauge and modify the programs to talk to the ECU directly.



Summary in 8 steps

1. The program shows the current transmission temperature as received from the Rialta ECM.

2. The scan gauge makes a request to the ECM for the transmission temperature as well as water temperature or whatever the scan gauge is set up to display

3. The computer server program (written in 'C') monitors the messages coming from the ECM that are responses to the scan gauge requests and looks for the transmission temperature messages

4. If the transmission temperature exceeds the user selected maximum transmission temperature it turns the relay on which powers the fan driven Derale transmission cooler. This is controlled by a 'python' client program which also was used for coding the User Interface

5. The fan stays on until it passes the user selected lower temperature

6. As you drive, the transmission cooler fan goes on and off keeping the temperature of the transmission within the selected temperature range.

7. The little red light on the dash goes on whenever the cooler is operating

8. The spdt switch next to the light has 3 settings. Fan disabled, fan operated by the software and finally fan always on.

Server Program

Client Program

Logging-messages-seen-on-the-wire

The following items were used to build the controller.